Multiconnect rCell LTE, CBRS Gateway
Zoom image

Multiconnect rCell LTE, CBRS Gateway

 

Buy MTR6-L12G1-B04-US from these Online Market Places

buy MTR6-L12G1-B04-US from RFWEL Engr E-Store

 

 

  • dbv0
Add a different product to compare


Signal Improvement Solutions (Cellular)
Multiconnect rCell LTE, CBRS Gateway includes 2 antenna ports to attach external cellular antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage. Additionally, see below for RF bidirectional amplifiers/ distributed antenna systems/ repeaters/ small cells to further improve indoor coverage without directly attaching pigtail/ cable the device.
Pigtail for External Cellular Antenna

PIGMTR6-L12G1-B04-US (NOTE: Need this pigtail to connect this device to antenna cable. It is included in preconfigured kits.)

Search Cable Adapters

Find other Device Pigtails

Pre-Configured Outdoor Cellular Antenna Kits

See below for the most popular LTE antenna kits to boost the signal of your Multiconnect rCell LTE, CBRS Gateway. These kits include cables, lightning protection, and all required pigtails/ adapters. If none of these pre-configured kits works for you, see below for customized solutions.

Pre-Configured Antenna Kits
Outdoor Direction Yagi Antenna Kits (RECOMMENDED) with 20 ft Cable with 50 ft Cable

12 dBi Directional Yagi Antenna kit for 698-2700 MHz operation. Slightly larger than Panel (dimensions: 35" x 9" x 2") but higher gain.

Also available with 100 ft cable RFWY12-MTR6-L12G1-B04-US-100 or see below for custom configuration.

buy  from Rfwel Infra

buy  from Rfwel Infra

Outdoor Directional Panel Antennas Kits with 20 ft Cable with 50 ft Cable

10 dBi Directional Panel Antenna kit for 698-2700 MHz operation. More compact than Yagi (dimensions: 26" x 13" x 5") but lower gain.

Also available with 100 ft cable RFWP10-MTR6-L12G1-B04-US-100 or see below for custom configuration.

buy  from Rfwel Infra

buy  from Rfwel Infra

Outdoor Omnidirection Antenna Kits with 20 ft Cable with 50 ft Cable

9 dBi Omni-directional Antenna kit for 698-2700 MHz operation. ONLY recommended if have no dominant signal from specific direction.

Also available with 100 ft cable RFW0M9-MTR6-L12G1-B04-US-100 or see below for custom configuration.

buy  from Rfwel Infra

buy  from Rfwel Infra

Related Signal Booster Kits:

  • Find other signal booster kits for Multi-Tech devices.

. . . search other signal booster kits in the Device Antenna Kits category.

Cellular Repeaters/ Bi-Directional Amplifiers

Because the Multiconnect rCell LTE, CBRS Gateway device has an external antenna port you could use the high gain external antenna kits above to boost your signal. However, if your outdoor signal is very weak, or you require a very long cable run to get from the outdoor antenna to the device (long runs lead to large signal loss) consider using an RF bidirectional amplifier/ repeater suitable for the supported bands and cellular operator to boost your indoor coverage:

LTE Antenna Boosters/ RF Bidirectional Amplifiers/ Repeaters/ Relays

Customize your solution

STEP 1: Determine what frequency bands your operator uses here, then click on the frequency band link to view the best ranked cellular antennas compatible with the frequency band that both your device and your cellular operator supports. Your Multiconnect rCell LTE, CBRS Gateway operates on these frequency bands: CBRS, LTE Band 42, LTE Band 43, LTE Band 48, LTE Band 1, LTE Band 2, LTE Band 3, LTE Band 4, LTE Band 5, LTE Band 7, LTE Band 8, LTE Band 9, LTE Band 12, LTE Band 13, LTE Band 14, LTE Band 18, LTE Band 19, LTE Band 20, LTE Band 26, LTE Band 29, LTE Band 30, LTE Band 32, LTE Band 41, LTE Band 46, LTE Band 66.

 

STEP 2: Determine the cable length you need from the outdoor antenna to the Multiconnect rCell LTE, CBRS Gateway and configure your length here (select N-Male on both ends)

 

STEP 3: Determine if you need a lightning protection device. If you do, you will need a jumper cable.

 

STEP 4: Order the pigtail for your modem below:

PIGMTR6-L12G1-B04-US (NOTE: Need this pigtail to connect this device to antenna cable. It is included in preconfigured kits.)

 

STEP 5: If the pigtail's Connector 2 is FME-F you will need an N-Female/FME-F adapter to mate to the N-Male cable in step 2. Alternatively, select an N-Male/FME-M cable in step 2 above (more expensive and less re-usable) to avoid requiring this adapter.

 

Contact us if unsure about any of the steps above or for help configuring your coverage/speed improvement solution or visit our support website to learn more.

See below for other LTE antennas or contact us if you cannot find what you are looking for

Other LTE Antennas

Signal Improvement Solutions (Wi-Fi)
Multiconnect rCell LTE, CBRS Gateway includes 2 antenna ports to attach external Wi-Fi antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage.
Select from Popular Wi-Fi Antennas

Best 2.4/5 GHz Wi-Fi Replacement Antennas (Rubber Duck)

Best 2.4/5 GHz Wi-Fi Ceiling Dome Antennas

Best 2.4/5 GHz Wi-Fi Panel Antennas

Best 2.4/5 GHz Wi-Fi Omni Antennas

Vehicle Wi-Fi Antennas

Other WLAN Antennas

Pigtails & Connectors for Wi-Fi Antenna Ports

Please contact us for updates on what pigtail/adapter you need to attach an external antenna to this device as the antenna port type is currently not listed in RFWEL's Wireless Device Database.

Search Other Adapters/ Connectors

WiFi Repeaters/ Extenders/ Relays

Because the Multiconnect rCell LTE, CBRS Gateway device has an external antenna port, you could use the high gain external antenna kits above to boost your signal. However, if your access point is very far, or you need to reach a WLAN station that is very far, or you require a very long cable run to get from the antenna mounting location to the device (long runs lead to large signal loss) consider using other Wi-Fi signal extension solutions as indicated below.

Wi-Fi Coverage Extension Solutions

Wireless Site & Infrastructure Solutions

See below for wireless site components to integrate Multiconnect rCell LTE, CBRS Gateway to your wireless infrastructure

Outdoor Radio Enclosure

Low loss RF Cables

Other Wireless Site Accessories

Power Solutions

See below for remote and backup power solutions for Multiconnect rCell LTE, CBRS Gateway

Off-Grid Solar Solutions

Remote Power Solutions

Additional Device Support

Datasheet

Indoor coverage solutions

Select Case Studies

Support Knowledge Base

Search MTR6-L12G1-B04-US articles

Discuss in the Forums

Search MTR6-L12G1-B04-US posts

Ask a Question

Reference Engr Drawings

    • RFWEL DevID
      MTR6-L12G1-B04-US
    • Manuf P/N
      MTR6-L12G1-B04-US
  • Brand/ Manuf
    Multi-Tech
  • Device Type
    LTE Router, CBRS Device (CBSD), CBRS End User Device (EUD)
  • Cellular Specifications
    • Cellular Bands
      LTE Band 66, LTE Band 46, LTE Band 41, LTE Band 32, LTE Band 30, LTE Band 29, LTE Band 26, LTE Band 20, LTE Band 19, LTE Band 18, LTE Band 14, LTE Band 13, LTE Band 12, LTE Band 9, LTE Band 8, LTE Band 7, LTE Band 5, LTE Band 4, LTE Band 3, LTE Band 2, LTE Band 1, LTE Band 48, LTE Band 43, LTE Band 42, CBRS
    • Cell Antenna Port?
      Yes
    • Cell Antenna Port Type
      SMA-Female
    • # of Cell Antenna Ports
      2
    • LTE Category
      Category 12
  • Wi-Fi Specifications
    • Wi-Fi Band
      2.4 GHz, 5 GHz
    • Wi-Fi Antenna Port?
      Yes
    • # Wi-Fi Antenna Ports
      2
  • Electrical
    • Voltage Input Range
      12 to 48 V
    • Power (Watts)
      20
    • PoE?
      Yes
    • POE Type
      Wire Terminal

Device questions

No questions yet. Be the first to ask a question!