Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro
Zoom image

Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro

--
  • dbv0
Add a different product to compare


Signal Improvement Solutions (Cellular)
Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro includes 2 antenna ports to attach external cellular antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage. Additionally, see below for RF bidirectional amplifiers/ distributed antenna systems/ repeaters/ small cells to further improve indoor coverage without directly attaching pigtail/ cable the device.
Pigtail for External Cellular Antenna

Search Cable Adapters

Find other Device Pigtails

Cellular Repeaters/ Bi-Directional Amplifiers

Because the Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro device has an external antenna port you could use the high gain external antenna kits above to boost your signal. However, if your outdoor signal is very weak, or you require a very long cable run to get from the outdoor antenna to the device (long runs lead to large signal loss) consider using an RF bidirectional amplifier/ repeater suitable for the supported bands and cellular operator to boost your indoor coverage:

LTE Antenna Boosters/ RF Bidirectional Amplifiers/ Repeaters/ Relays

Customize your solution

STEP 1: Determine what frequency bands your operator uses here, then click on the frequency band link to view the best ranked cellular antennas compatible with the frequency band that both your device and your cellular operator supports. Your Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro operates on these frequency bands: LTE Band 1, LTE Band 3, LTE Band 7, LTE Band 8, LTE Band 20, LTE Band 28, LTE Band 38, 700 MHz, 800 MHz, 900 MHz (ISM).

 

STEP 2: Determine the cable length you need from the outdoor antenna to the Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro and configure your length here (select N-Male on both ends)

 

STEP 3: Determine if you need a lightning protection device. If you do, you will need a jumper cable.

 

STEP 4: Order the pigtail for your modem below:

 

STEP 5: If the pigtail's Connector 2 is FME-F you will need an N-Female/FME-F adapter to mate to the N-Male cable in step 2. Alternatively, select an N-Male/FME-M cable in step 2 above (more expensive and less re-usable) to avoid requiring this adapter.

 

Contact us if unsure about any of the steps above or for help configuring your coverage/speed improvement solution or visit our support website to learn more.

See below for other LTE antennas or contact us if you cannot find what you are looking for

Other LTE Antennas

Signal Improvement Solutions (Wi-Fi)
Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro is not listed as having an external Wi-Fi antenna port in the RFWEL Wireless Device Information Database. This may be either because the device really does not have an external antenna port or RFWEL Wireless Device Specialists have not confirmed the existence and utility of such ports. Please contact us for the latest updates or if you believe this device contains external antenna ports and you would like to learn more about compatible signal improvement solutions.
WiFi Repeaters/ Extenders/ Relays

Because the Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro is not listed as having an external antenna port, you would need to use a wireless network extender or repeater to increase the WiFi signal coverage

Wi-Fi Coverage Extension Solutions

Wireless Site & Infrastructure Solutions

See below for wireless site components to integrate Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro to your wireless infrastructure

Outdoor Radio Enclosure

Low loss RF Cables

Other Wireless Site Accessories

Power Solutions

See below for remote and backup power solutions for Huawei 4G LTE CAT7 Wi-Fi Router 3 Pro

Off-Grid Solar Solutions

Remote Power Solutions

Additional Device Support

Indoor coverage solutions

Select Case Studies

Support Knowledge Base

Search B535-235 articles

Discuss in the Forums

Search B535-235 posts

Ask a Question


Select Engineering Drawings

Mobile communication trailer

Residential Solution for Multi-WAN connectivity and Wi-Fi

View More Engineering Drawings ...

    • Weight
      0.7000 lbs
    • RFWEL DevID
      B535-235
    • Manuf P/N
      B535-235
  • Brand/ Manuf
    Huawei
  • Device Type
    Wi-Fi Router, LTE Router
  • Cellular Specifications
    • Cellular Standards
      LTE
    • Cellular Bands
      900 MHz (ISM), 800 MHz, 700 MHz, LTE Band 38, LTE Band 28, LTE Band 20, LTE Band 8, LTE Band 7, LTE Band 3, LTE Band 1
    • Cell Antenna Port?
      Yes
    • Cell Antenna Port Type
      SMA-Female
    • # of Cell Antenna Ports
      2
    • LTE Category
      Category 7
  • Wi-Fi Specifications
    • Wi-Fi Standard
      Wi-Fi 5 (802.11ac), Wi-Fi 4 (802.11n), 802.11g, 802.11b, 802.11a
    • Wi-Fi Band
      5 GHz, 2.4 GHz
  • Electrical
    • Voltage Input Range
      100 to 240 V
    • Voltage Input
      12
    • Current Input (Amps)
      1
    • Power (Watts)
      12
    • PoE?
      Yes
  • Mechanical
    • Weight (lbs)
      0.7
    • Dimensions (inch)
      8.6 x 5.4 x 1
    • Operating Temperature (degF)
      32 to 104

Device questions

No questions yet. Be the first to ask a question!