Peplink HD2 Mini LTE Router
Zoom image

Peplink HD2 Mini LTE Router

Pepwave MAX HD2 MINI LTE is a compact mobile Router with seamless failover and comes without Wi-Fi and is an ideal choice for tough deployments that demand high performance, reliability and compliance requirement. The MAX HD2 MINI LTE offers Redundant SIM Slots for Multiple Carriers and a terminal block for secure power supply.

  • dbv0
Add a different product to compare


Signal Improvement Solutions (Cellular)
Peplink HD2 Mini LTE Router includes 4 antenna ports to attach external cellular antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage. Additionally, see below for RF bidirectional amplifiers/ distributed antenna systems/ repeaters/ small cells to further improve indoor coverage without directly attaching pigtail/ cable the device.
Pigtail for External Cellular Antenna

Search Cable Adapters

Find other Device Pigtails

Cellular Repeaters/ Bi-Directional Amplifiers

Because the Peplink HD2 Mini LTE Router device has an external antenna port you could use the high gain external antenna kits above to boost your signal. However, if your outdoor signal is very weak, or you require a very long cable run to get from the outdoor antenna to the device (long runs lead to large signal loss) consider using an RF bidirectional amplifier/ repeater suitable for the supported bands and cellular operator to boost your indoor coverage:

LTE Antenna Boosters/ RF Bidirectional Amplifiers/ Repeaters/ Relays

Customize your solution

STEP 1: Determine what frequency bands your operator uses here, then click on the frequency band link to view the best ranked cellular antennas compatible with the frequency band that both your device and your cellular operator supports. Your Peplink HD2 Mini LTE Router operates on these frequency bands: LTE Band 1, LTE Band 3, LTE Band 5, LTE Band 7, LTE Band 8, LTE Band 20, LTE Band 38, LTE Band 40, LTE Band 41.

 

STEP 2: Determine the cable length you need from the outdoor antenna to the Peplink HD2 Mini LTE Router and configure your length here (select N-Male on both ends)

 

STEP 3: Determine if you need a lightning protection device. If you do, you will need a jumper cable.

 

STEP 4: Order the pigtail for your modem below:

 

STEP 5: If the pigtail's Connector 2 is FME-F you will need an N-Female/FME-F adapter to mate to the N-Male cable in step 2. Alternatively, select an N-Male/FME-M cable in step 2 above (more expensive and less re-usable) to avoid requiring this adapter.

 

Contact us if unsure about any of the steps above or for help configuring your coverage/speed improvement solution or visit our support website to learn more.

See below for other LTE antennas or contact us if you cannot find what you are looking for

Other LTE Antennas

Wireless Site & Infrastructure Solutions

See below for wireless site components to integrate Peplink HD2 Mini LTE Router to your wireless infrastructure

Outdoor Radio Enclosure

Low loss RF Cables

Other Wireless Site Accessories

Power Solutions

See below for remote and backup power solutions for Peplink HD2 Mini LTE Router

Off-Grid Solar Solutions

Remote Power Solutions

Additional Device Support

Datasheet

Indoor coverage solutions

Select Case Studies

Support Knowledge Base

Search HD2-MINI-LTE articles

Discuss in the Forums

Search HD2-MINI-LTE posts

Ask a Question


Select Engineering Drawings

Mobile communication trailer

Residential Solution for Multi-WAN connectivity and Wi-Fi

View More Engineering Drawings ...

    • Weight
      1.0000 lbs
    • RFWEL DevID
      HD2-MINI-LTE
    • Manuf P/N
      HD2-MINI-LTE
  • Cellular Operators
    U.S Cellular, Bell Canada, Rogers, Telus, T-Mobile, Sprint, Verizon, ATT
  • Brand/ Manuf
    Peplink
  • Device Type
    Multi-WAN Router, LTE Router
  • Cellular Specifications
    • Cellular Bands
      LTE Band 41, LTE Band 40, LTE Band 38, LTE Band 20, LTE Band 8, LTE Band 7, LTE Band 5, LTE Band 3, LTE Band 1
    • Cell Antenna Port?
      Yes
    • # of Cell Antenna Ports
      4
  • GPS Specifications
    • GPS Antenna Port?
      Yes
    • GPS Antenna Port Type
      SMA-Female
  • Electrical
    • Voltage Input Range
      10 to 56 V
    • Current Input (Amps)
      2
    • Power (Watts)
      15
    • PoE?
      Yes
    • POE Type
      Terminal Block
  • Mechanical
    • Weight (lbs)
      1
    • Dimensions (inch)
      5.8 x 5 x 1.6

Device questions

No questions yet. Be the first to ask a question!