wAP-LTE-Kit-US Mikrotik wAP LTE-US, 2.4GHz Kit
Signal Improvement Solutions (Cellular) |
wAP-LTE-Kit-US Mikrotik wAP LTE-US, 2.4GHz Kit includes 2 antenna ports to attach external cellular antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage. Additionally, see below for RF bidirectional amplifiers/ distributed antenna systems/ repeaters/ small cells to further improve indoor coverage without directly attaching pigtail/ cable the device. |
Pigtail for External Cellular Antenna |
Cellular Repeaters/ Bi-Directional Amplifiers |
Because the wAP-LTE-Kit-US Mikrotik wAP LTE-US, 2.4GHz Kit device has an external antenna port you could use the high gain external antenna kits above to boost your signal. However, if your outdoor signal is very weak, or you require a very long cable run to get from the outdoor antenna to the device (long runs lead to large signal loss) consider using an RF bidirectional amplifier/ repeater suitable for the supported bands and cellular operator to boost your indoor coverage: LTE Antenna Boosters/ RF Bidirectional Amplifiers/ Repeaters/ Relays |
Customize your solution |
STEP 1: Determine what frequency bands your operator uses here, then click on the frequency band link to view the best ranked cellular antennas compatible with the frequency band that both your device and your cellular operator supports. Your wAP-LTE-Kit-US Mikrotik wAP LTE-US, 2.4GHz Kit operates on these frequency bands: LTE Band 2, LTE Band 4, LTE Band 5, LTE Band 12.
STEP 2: Determine the cable length you need from the outdoor antenna to the wAP-LTE-Kit-US Mikrotik wAP LTE-US, 2.4GHz Kit and configure your length here (select N-Male on both ends)
STEP 3: Determine if you need a lightning protection device. If you do, you will need a jumper cable.
STEP 4: Order the pigtail for your modem below:
STEP 5: If the pigtail's Connector 2 is FME-F you will need an N-Female/FME-F adapter to mate to the N-Male cable in step 2. Alternatively, select an N-Male/FME-M cable in step 2 above (more expensive and less re-usable) to avoid requiring this adapter.
Contact us if unsure about any of the steps above or for help configuring your coverage/speed improvement solution or visit our support website to learn more. See below for other LTE antennas or contact us if you cannot find what you are looking for |
Signal Improvement Solutions (Wi-Fi) |
wAP-LTE-Kit-US Mikrotik wAP LTE-US, 2.4GHz Kit is not listed as having an external Wi-Fi antenna port in the RFWEL Wireless Device Information Database. This may be either because the device really does not have an external antenna port or RFWEL Wireless Device Specialists have not confirmed the existence and utility of such ports. Please contact us for the latest updates or if you believe this device contains external antenna ports and you would like to learn more about compatible signal improvement solutions. |
WiFi Repeaters/ Extenders/ Relays |
Because the wAP-LTE-Kit-US Mikrotik wAP LTE-US, 2.4GHz Kit is not listed as having an external antenna port, you would need to use a wireless network extender or repeater to increase the WiFi signal coverage |
Wireless Site & Infrastructure Solutions |
See below for wireless site components to integrate wAP-LTE-Kit-US Mikrotik wAP LTE-US, 2.4GHz Kit to your wireless infrastructure Other Wireless Site Accessories Consider Related Infrastructure Equipment
|
Power Solutions |
See below for remote and backup power solutions for wAP-LTE-Kit-US Mikrotik wAP LTE-US, 2.4GHz Kit |
Additional Device Support |
Search wAP-LTE-Kit-US articles Select Engineering Drawings |
-
Brand/ ManufMikro Tik
-
Device TypeWi-Fi Router, Wi-Fi Access Point, LTE Router
- Cellular Specifications
-
Cellular StandardsLTE
-
Cellular BandsLTE Band 12, LTE Band 5, LTE Band 4, LTE Band 2
-
Cell Antenna Port?Yes
-
Cell Antenna Port TypeU.FL Male (On PCB)
-
# of Cell Antenna Ports2
-
LTE CategoryCategory 4
-
- Wi-Fi Specifications
-
Gain of Existing Wi-Fi Antenna(s) (dBi)2
-
Wi-Fi StandardWi-Fi 4 (802.11n), 802.11g, 802.11b
-
Wi-Fi Band2.4 GHz
-
Wi-Fi Antenna(s)Internal
-
- Electrical
-
Voltage Input Range9 to 30 V
-
Power (Watts)8
-
PoE?Yes
-
- Mechanical
-
Weight (lbs)1.8
-
Dimensions (inch)7.3 x 3.34 x 1.18
-