Verizon Wireless Home Phone T2000
Zoom image

Verizon Wireless Home Phone T2000

--
  • dbv0
Add a different product to compare


Signal Improvement Solutions (Cellular)
Verizon Wireless Home Phone T2000 includes an antenna port to attach external cellular antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage. Additionally, see below for RF bidirectional amplifiers/ distributed antenna systems/ repeaters/ small cells to further improve indoor coverage without directly attaching pigtail/ cable the device.
Pigtail for External Cellular Antenna

PIGT2000 (NOTE: Need this pigtail to connect this device to antenna cable. It is included in preconfigured kits.)

Search Cable Adapters

Find other Device Pigtails

Pre-Configured Outdoor Cellular Antenna Kits

See below for the most popular LTE antenna kits to boost the signal of your Verizon Wireless Home Phone T2000. These kits include cables, lightning protection, and all required pigtails/ adapters. If none of these pre-configured kits works for you, see below for customized solutions.

Pre-Configured Antenna Kits
Outdoor Direction Yagi Antenna Kits (RECOMMENDED) with 20 ft Cable with 50 ft Cable

12 dBi Directional Yagi Antenna kit for 698-2700 MHz operation. Slightly larger than Panel (dimensions: 35" x 9" x 2") but higher gain.

Also available with 100 ft cable RFWY12-T2000-100 or see below for custom configuration.

buy  from Rfwel Infra

buy  from Rfwel Infra

buy RFWY12-T2000-050 from Amazon

buy RFWY12-T2000-050 from Newegg eBay

buy RFWY12-T2000-050 from Newegg

Outdoor Directional Panel Antennas Kits with 20 ft Cable with 50 ft Cable

10 dBi Directional Panel Antenna kit for 698-2700 MHz operation. More compact than Yagi (dimensions: 26" x 13" x 5") but lower gain.

Also available with 100 ft cable RFWP10-T2000-100 or see below for custom configuration.

buy  from Rfwel Infra

buy  from Rfwel Infra

buy RFWP10-T2000-050 from Amazon

buy RFWP10-T2000-050 from Newegg eBay

Outdoor Omnidirection Antenna Kits with 20 ft Cable with 50 ft Cable

9 dBi Omni-directional Antenna kit for 698-2700 MHz operation. ONLY recommended if have no dominant signal from specific direction.

Also available with 100 ft cable RFW0M9-T2000-100 or see below for custom configuration.

buy  from Rfwel Infra

buy  from Rfwel Infra

buy RFW0M9-T2000-050 from Amazon

buy RFW0M9-T2000-050 from Newegg eBay

Related Signal Booster Kits:

  • Find other signal booster kits for Inseego devices.
  • Find other signal booster kits for Verizon devices.

. . . search other signal booster kits in the Device Antenna Kits category.

Cellular Repeaters/ Bi-Directional Amplifiers

Because the Verizon Wireless Home Phone T2000 device has an external antenna port you could use the high gain external antenna kits above to boost your signal. However, if your outdoor signal is very weak, or you require a very long cable run to get from the outdoor antenna to the device (long runs lead to large signal loss) consider using an RF bidirectional amplifier/ repeater suitable for the supported bands and cellular operator to boost your indoor coverage:

LTE Antenna Boosters/ RF Bidirectional Amplifiers/ Repeaters/ Relays

Customize your solution

STEP 1: Determine what frequency bands your operator uses here, then click on the frequency band link to view the best ranked cellular antennas compatible with the frequency band that both your device and your cellular operator supports. Your Verizon Wireless Home Phone T2000 operates on these frequency bands: LTE Band 2, LTE Band 4, LTE Band 13.

 

STEP 2: Determine the cable length you need from the outdoor antenna to the Verizon Wireless Home Phone T2000 and configure your length here (select N-Male on both ends)

 

STEP 3: Determine if you need a lightning protection device. If you do, you will need a jumper cable.

 

STEP 4: Order the pigtail for your modem below:

PIGT2000 (NOTE: Need this pigtail to connect this device to antenna cable. It is included in preconfigured kits.)

 

STEP 5: If the pigtail's Connector 2 is FME-F you will need an N-Female/FME-F adapter to mate to the N-Male cable in step 2. Alternatively, select an N-Male/FME-M cable in step 2 above (more expensive and less re-usable) to avoid requiring this adapter.

 

Contact us if unsure about any of the steps above or for help configuring your coverage/speed improvement solution or visit our support website to learn more.

See below for other LTE antennas or contact us if you cannot find what you are looking for

Other LTE Antennas

Wireless Site & Infrastructure Solutions

See below for wireless site components to integrate Verizon Wireless Home Phone T2000 to your wireless infrastructure

Outdoor Radio Enclosure

Low loss RF Cables

Other Wireless Site Accessories

Power Solutions

See below for remote and backup power solutions for Verizon Wireless Home Phone T2000

Off-Grid Solar Solutions

Remote Power Solutions

Additional Device Support

Datasheet

View Device in Manufacturer's website

Support Knowledge Base

Discuss in the Forums

Ask a Question

Reference Engr Drawings

    • RFWEL DevID
      T2000
    • Manuf P/N
      T2000
  • Cellular Operators
    Verizon
  • Brand/ Manuf
    Inseego
  • Cellular Specifications
    • Cellular Standards
      LTE
    • Cellular Bands
      LTE Band 13, LTE Band 4, LTE Band 2
    • Cell Antenna Port?
      Yes
    • Cellular Radio Includes External Antenna Port?
      Yes
    • Cellular Antenna Port Type
      SMA-Female
    • # of Cell Antenna Ports
      1
    • Number of Cellular Antenna Ports
      1
    • LTE Category
      Category 4
  • Mechanical
    • Dimensions (inch)
      4.69 x 5.2 x 1.18
    • Operating Temperature (degF)
      14 to 131

Device questions

  • Ron Butte
    Mar 11, 2022, 17:04

    Does the T2000 support 4G bands (B2/B5/B13/B4)

    WDI DB Admin
    Mar 13, 2022, 12:57

    T2000 supports LTE bands B2/B4/B13.