ZTE R800 IoT Router
Zoom image

ZTE R800 IoT Router

--
  • dbv0
Add a different product to compare


Signal Improvement Solutions (Cellular)
ZTE R800 IoT Router includes 2 antenna ports to attach external cellular antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage. Additionally, see below for RF bidirectional amplifiers/ distributed antenna systems/ repeaters/ small cells to further improve indoor coverage without directly attaching pigtail/ cable the device.
Pigtail for External Cellular Antenna

Search Cable Adapters

Find other Device Pigtails

Cellular Repeaters/ Bi-Directional Amplifiers

Because the ZTE R800 IoT Router device has an external antenna port you could use the high gain external antenna kits above to boost your signal. However, if your outdoor signal is very weak, or you require a very long cable run to get from the outdoor antenna to the device (long runs lead to large signal loss) consider using an RF bidirectional amplifier/ repeater suitable for the supported bands and cellular operator to boost your indoor coverage:

LTE Antenna Boosters/ RF Bidirectional Amplifiers/ Repeaters/ Relays

Customize your solution

STEP 1: Determine what frequency bands your operator uses here, then click on the frequency band link to view the best ranked cellular antennas compatible with the frequency band that both your device and your cellular operator supports. Your ZTE R800 IoT Router operates on these frequency bands: LTE Band 12, LTE Band 17, LTE Band 2, LTE Band 4, LTE Band 5.

 

STEP 2: Determine the cable length you need from the outdoor antenna to the ZTE R800 IoT Router and configure your length here (select N-Male on both ends)

 

STEP 3: Determine if you need a lightning protection device. If you do, you will need a jumper cable.

 

STEP 4: Order the pigtail for your modem below:

 

STEP 5: If the pigtail's Connector 2 is FME-F you will need an N-Female/FME-F adapter to mate to the N-Male cable in step 2. Alternatively, select an N-Male/FME-M cable in step 2 above (more expensive and less re-usable) to avoid requiring this adapter.

 

Contact us if unsure about any of the steps above or for help configuring your coverage/speed improvement solution or visit our support website to learn more.

See below for other LTE antennas or contact us if you cannot find what you are looking for

Other LTE Antennas

Wireless Site & Infrastructure Solutions

See below for wireless site components to integrate ZTE R800 IoT Router to your wireless infrastructure

Outdoor Radio Enclosure

Low loss RF Cables

Other Wireless Site Accessories

Power Solutions

See below for remote and backup power solutions for ZTE R800 IoT Router

Off-Grid Solar Solutions

Remote Power Solutions

Additional Device Support

Indoor coverage solutions

Select Case Studies

View Device in Manufacturer's website

Support Knowledge Base

Search R800 articles

Discuss in the Forums

Search R800 posts

Ask a Question


Select Engineering Drawings

Mobile communication trailer

Residential Solution for Multi-WAN connectivity and Wi-Fi

View More Engineering Drawings ...

    • Weight
      0.8000 lbs
    • RFWEL DevID
      R800
    • Manuf P/N
      R800
  • Cellular Operators
    ATT
  • Brand/ Manuf
    ZTE
  • Cellular Specifications
    • Cellular Standards
      LTE
    • Cellular Bands
      LTE Band 5, LTE Band 4, LTE Band 2, LTE Band 17, LTE Band 12
    • Cell Antenna Port?
      Yes
    • Cellular Radio Includes External Antenna Port?
      Yes
    • Cellular Antenna Port Type
      SMA-Female
    • # of Cell Antenna Ports
      2
    • Number of Cellular Antenna Ports
      2
    • Cellular Main Radio Chipset Vendor
      Qualcomm
    • Cellular Main Radio Chipset
      MDM9207
  • Electrical
    • Current Input (Amps)
      0.5
    • PoE?
      Yes
  • Mechanical
    • Weight (lbs)
      0.8
    • Dimensions (inch)
      4.64 x 3.94 x 0.87
    • Operating Temperature (degF)
      -13 to 149

Device questions

No questions yet. Be the first to ask a question!